GoPro Hero 3

The wifi enabled HERO3: Black edition is the most advanced gopro, ever. Compare to older version. 30% smaller,25% lighter and 2x more powerful.

AlaMode

  I do make my own Arduino Board for RaspberryPI before. But it make from prototype board and have a lot of cable. I like that but I still not able to put a Arduino shield into my DIY board. So, this is my solution. The AlaMode. It have RaspberryPI GPIO port, Arduino Shield Compatible…

Raspberry PI with DIY blink1

  I found the blink1 on kickstarter (http://www.kickstarter.com/projects/thingm/blink1-the-usb-rgb-led) and I think this is useful when I want to alert my college. If i’m busy i’ll flag it to red and green when free. If you interested, you can follow kickstarter link and find more detail. Also software for using it on linux. That’s mean you…

DJI Phantom

New member to my quad copter family. DJI Phantom (Code name P330). This is called RTF (Ready to flight) product and it like that!. Just recharge 3S LiPO battery and put 4xAA battery into transmitter. Done. The advantage point for this quad is body and GoPro mount on below. I can put my GoPro Hero3…

mbed Application Board

The mbed boards are a series of ARM microcontroller development boards designed for rapid prototyping and this is breakout makes it easy to get up and running with your mbed LPC1768 module. The new application board has been designed to enable the maximum number of potential experiments and projects, with the minimum footprint. And this…

WiFly Module RN-XV

I just see this module on spark fun. The concept is replace a Xbee network with wifi solution.I have many equipment using Xbee network and I want to take control by smartphone. So, option is Bluetooth or wifi. But Bluetooth is not a wise choose for robot/autonomous. Many limitation to control, range and need more equipment…

DJI Naza-H 1.04 test flight. (Fixed right drift)

I can confirmed about this fix. It’s solved my Atti mode right drift issue. It’s cleaver to have Atti trim function. As picture below, you’ll allow to trim on both Aile and Elev. But please note. After do some trial and error, the trim value depend on your battery condition. If you not use governor,…

APM 2.5 ready to flight again.

Long time ago when I got APM2.5. I found it behavior is wired. Sometime the horizontal line is spin. First I think it came from some of my quad component or firmware. So I leave it on a table. Last month. I decided to take a look and find a way to fix this. I…

DJI Naza-H firmware 1.04 released

After a community feedback to DJI team about right drift when fly Naza-H in Attitude Hold mode. They promised to release a fix. And now it out. What’s new? Atti. Trim function, which allows user to trim heli to make it more stable and less drifting in Atti. Mode in the assistant software. Sound good?…